World
Guns

Home

 

 

 

Ortgies Pistol
Field Stripping

OrtgiesPP1.gif (6385 bytes)

OrtgiesPP2.gif (14954 bytes)

OrtgiesPPa1.gif (2544 bytes) Remove magazine (13). Pull slide (1) back until slide serrations line up approximately wth end of frmae as shown. Push in takedown catch (17) and lift end of slide free of frame. Push slide forward off barrel.
  To remove barrel (24) for cleaning or repair, grasp barrel (24) and frame (23) as shown. Twist barrel counterclockwise wintil it is at right angles to frame and lift up.
OrtgiesPPa3.gif (4147 bytes) To remove grips, insert a screwdriver into magazine will and push grip latch (12) in toward backstrap. At same time pry or push up back edge of grips and rotate them free of undercut on front edge of grip.
OrtgiesPPa4.gif (2941 bytes) Ortgies reassembles easily once firing pin (7) is held in check. Push firing pin spring (6) and guide (5) into firing pin until end of guide can be pushed into its otch in top of slide. Hook slide over barrel, pull it to rear and downward.