1873 Assy / Dissy

	Disengage the rod head by making it a 180° turn.
Press the lock button (here in the middle of the picture) and pull the rod.
	Pull the hammer to the first position, put the gate back push the cyliner through from left to right.
With the screw driver (in the rod bar) unscrew the screw at the right of the frame. Put the srew driver rod as shown right to extract the side plate.
	Pull of the left stock.
Unscrew the right stock. Never force this operation as it could result in damaging the stock.
	Trutn the disassmbly key at the bottom right (in the left picture), and remove the main spring.
Remove the trigger guard will allow accessing the gate detent spring. Therefore you can remove the parts one by one, hammer, sear, elevator hand, trigger.
That's where you should be ...